Gorenje R141BAB, Instructions For Use Manual, Page: 12 / 14

Instructions for Use
28
Changing the Direction of Opening the Door
(models with worktop only)
If you find the direction of opening the door on
your appliance inconvenient, you can change it.
Holes on the opposite side have already been
prepared in the factory and are now plugged.
•
Unscrew the lower hinge with foot and washer
and remove the door of the appliance.
•
Unscrew the other foot and fix it on the place
where previously was the hinge with the foot.
•
Rotate the fastener having the function of the
upper hinge counter clockwise and replace it to
the opposite side of the door.
•
Remove the fastener of the door corner with the
hole and replace it to the opposite side.
•
Put the door on the fastener having the function
of the uper hinge.
•
Put the lower hinge fastener with foot and
washer into the plastic corner with a hole and
fix the lower hinge.
•
Unscrew the handle and replace it to the
opposite side (not for handles mouinted
horizontally).
Some screws are covered with caps. Take
them off before undoing the screws.
•
Plug the remaining holes with decorative caps.
•
Check the gasket, it shouldn't be creased and it
should seal well.
Should the seal not adhere to the casing of the
appliance perfectly, it will have to be heated
from a suitable distance (by means of hair drier,
for example) and lightly stretched to the
required height.
1 Lower hinge with foot 4 Fastener
2 Lower hinge washer 5 Handle
3 Foot 6 Fastener of the corner with a hole