Gorenje R141BAB, Instructions For Use Manual, Page: 11 / 14

Instructions for Use
27
Changing the Direction of Opening the Door
(models without the worktop)
If you find the direction of opening the door on
your appliance inconvenient, you can change it.
Holes on the opposite side have already been
prepared in the factory and are now plugged.
•
Remove the cover of the upper hinge, unscrew
the upper hinge and take off the door of the
appliance.
•
Unscrew the lower hinge with foot and washer.
•
Fix the lower hinge with foot and washer to the
opposite side and fix the other foot on the place
where previously was the hinge.
•
Remove the fastener of the door corner with the
hole and replace it to the opposite side.
•
Put the door on the lower hinge.
•
Fix the upper hinge and cover it.
•
Unscrew the handle and replace it to the
opposite side (not for handles mouinted
horizontally).
Some screws are covered with caps. Take
them off before undoing the screws.
•
Plug the remaining holes with decorative caps.
•
Check the gasket, it shouldn't be creased and it
should seal well.
Should the seal not adhere to the casing of the
appliance perfectly, it will have to be heated
from a suitable distance (by means of hair drier,
for example) and lightly stretched to the
required height.
1 Upper hinge cover 5 Foot
2 Upper hinge 6 Handle
3 Lower hinge with foot 7 Fastener of the corner with a hole
4 Lower hinge washer