Delayed start
When you select Delayed start the
dishwasher will start 1-24 hours after you
close the door.
1. Press the button once to activate
Delayed start. Press the button several
times – or hold it in – to set the desired
number of hours.
2. Close the door and the dishwasher
counts down 1 hour at a time and starts
after the selected delay.
If you want to cancel the Delayed start
option, open the door and press and hold
the main power switch until the display
turns off.
Starting the dishwasher
Close the door to start the dishwasher. If
the main power switch is on the
dishwasher will start automatically when
the door is closed.
TIME - Time remaining
Once you have chosen a programme and
options, the time the programme took
when last used is displayed.
Status light
The status light on the bottom part of the
dishwasher indicates that a programme
has started.
Flashing light
This indicates a fault. See further in the
section Troubleshooting.
Status light
Stopping or changing a programme
If you want to change programme after
starting the dishwasher, open the door
then press and hold the main power
switch until the display turns off. Add more
detergent if the lid of the detergent
dispenser has opened. Then press the
main power switch, choose a new
programme and close the door.
If you want to load more dishes
Open the door. The dishwasher stops
automatically. Add the dishes and close
the door. After a while, the dishwasher
continues the programme.
If the dishwasher is turned off due
to a power failure
If the dishwashing programme was not
finished, the interrupted programme
continues when power is restored.
NOTE!
During drying, the programme is
interrupted if the power is cut or the door
is open for more than 2 minutes.
Once the programme has finished
Moreover, the end of the programme is
indicated by the status light turning off.
10
