12
• Stand you appliance in a dry place to avoid damage moisure.
• Keep the appliance out of direct sunlight, rain or frost. Stand the appliance
away from heat sources such as stoves, fires or heaters.
Leveling of appliance
• For sufficient leveling and air circulating in the lower rear section of the
appliance, the bottom feet may need to be adjusted, You can adjust them by
your fingers or a suitable spanner.
• To allow the doors to self-close, tilt back the top backwards for abaut 10 mm.
İ
10mm
Rotary separator
• Before closing the fridg door, the flipper clapboard should be correctly in
position to allow the door to close properly. See pictures below.
Note:
It is normal that the flipper clapboard feels hot as there is a heater
installed inside the clapboard to prevent dewing.