18
7. Change screw hole covers on middle cover plate from left to right (as shown in
figure below).
screw hole covers
screw hole covers
8. Lay the refrigerator on soft foam packaging or similar material. Remove both
adjustable bottom feet parts, and the lower hinge part by unscrewing the
special flange self-tapping screws.
①
②
③
1 Adjustable bottom feet part
2 Lower hinge part (right)
3 Self tapping screws
9. Remove part (1) from the lower hinge part(right), loose out the lower hinge
pin, change it to the reverse hole site, and then tighten into position, then
install part (1) on the lower hinge pin.
①
10.Change screw hole covers on lower cover plate from left to right (as shown in
figure below).
screw hole covers
screw hole covers