31
Thoroughly dry all surfaces and removable parts before putting them back into
place.
Although this appliance automatically defrosts, a layer of frost may occur on the
freezer compartment’s interior walls if the freezer door is opened frequently or
kept open too long. If the frost is too thick, choose a time when the freezer is
nearly empty and proceed as follow:
1. Remove existing food and accessories baskets, unplug the appliance from
the mains power and leave the doors open. Ventilate the room thoroughly to
accelerate the process.
2. When defrosting is completed, clean your freezer as described above.
Caution! Do not use sharp objects to remove frost from the freezer
compartment. Only after the interior is completely dry should the appliance be
switched back on and plugged back into the mains socket.
Door seals cleaning
Take care to keep door seals clean. Sticky food and drinks can cause seals to
stick to the cabinet and tear when you open the door. Wash the seals with a mild
detergent and warm water. Rinse and dry them thoroughly after cleaning.
Warning! Only after the door seals are completely dry should the appliance be
powered on.
Replacing the LED light
Warning:
The LED light should be replaced by a competent person. If the LED
light is damaged, contact the customer helpline for assistance. To replace the
LED light, the below steps can be followed:
1. Unplug your appliance.
2. Remove light cover by pushing up and out.
3. Hold the LED cover with one hand and pull it with the other hand while
pressing the connector latch.
4. Replace LED light and snap it correctly in place.