Gorenje K10BY, Instruction Manual, Page: 35 / 101

35
MILK REHEATING (WARMER)
1. Pour 100 ml of potable water into the glass jug.
2. Place the insert (E) into the glass jug (P4), then place the bottle with milk (P5) into the insert (E) and cover with
the lid (F) (P6).
3. Press the program selector key (P2/1) to select the desired program. The light above the selected program will
light up.
4. Temperature (P3/4) and program settings (3/5) icons will appear on the LCD display. After three seconds, the
program settings icon (P3/5) turns to operation icon (P3/6). The preset temperature is 37°C, but it can be
adjusted using the + and
– keys.
5. Water temperature is displayed on the LCD display.
6. See the milk reheating table. When the set time expires, remove the bottle from the appliance.
Note: milk reheating time may vary depending on the initial milk temperature and the type of bottle
you are using.
7. Before feeding your baby, always check the milk temperature! Gently shake the bottle and check the milk
temperature by applying a few drops of milk to the inner side of your wrist.
8. Be careful not to overheat the milk as this will deprive it of nutrients and vitamins.
9. Switch off the appliance after use.
MILK REHEATING TABLE
Milk amount Initial milk temperature
5
°C
20
°C
125 ml 6 minutes 4 minutes
260 ml 8 minutes 6 minutes
Note: Milk reheating time is affected by the size, wall thickness, and material of the bottle. Actual
reheating time may differ from the times indicated in the table.
P4
P5 P6