![Gorenje GV693C60UVAD User Manual Download Page 19](http://html1.mh-extra.com/html/gorenje/gv693c60uvad/gv693c60uvad_user-manual_2245228019.webp)
Stopping or changing a program
Open the door. If you want to interrupt or change the program after starting the dishwasher, press
and hold
for three seconds.
Top up with new detergent if the lid of the detergent dispenser has opened. Then select a new program,
press
and close the door.
Remaining time
Once you have chosen a program and options, the time the program took when last used is displayed.
Status LedLight
The status light on the bottom part of the dishwasher indicates that a program has started.
Flashing light
A flashing light indicates that the door has been opened while a program is in progress. If it flashes
when the door is closed, an error has occurred. See the chapter
.
Status light
If you want to load more dishes
1)
Open the door. The dishwasher stops automatically. Add the dishes and close the door. After a while,
the dishwasher continues the program.
If the dishwashing program was remote started, the interrupted program will continue once the door
is closed. You can monitor the dishwasher using the
ConnectLife
app and remote stop the program,
although you will not be able to remote start it again.
Power failure
If the dishwasher is turned off due to a power failure when a dishwashing program is running, the
program continues when power is restored. If the power is cut during drying, the program is interrupted.
If the dishwashing program was remote started and has not ended, the program will continue once
the power is restored. You can monitor the dishwasher using the
ConnectLife
app and remote stop
the program, although you will not be able to remote start it again.
If the door is open for more than 2 minutes during drying, the program is interrupted.
Once the program has finished
The end of the program is indicated by one short signal from the buzzer. The chapter
describes
how to change this function.
Moreover, the end of the program is indicated by the status light turning off.
Once the dishwasher door is opened and the program has finished "End" appears on the display.
1)
You can load more dishes within 5 minutes after you have started the dishwasher.
19