settle for a while. Check that all
connections are watertight.
Connection to cold water supply
Connect the dishwasher to the cold water
supply if the building is heated using oil,
electricity or gas.
Connection to hot water supply
Connect the dishwasher to the hot water
supply (max. 70 °C) if the building is
heated using an energy-efficient means
such as district heating, solar power or
geothermal power. Choosing a hot water
connection cuts dishwashing times and
reduces the dishwasher's energy
consumption.
NOTE!
Do not exceed the permitted water
supply temperature. Certain materials
used in some cookware cannot
withstand strong heat. See Fragile
dishes in the chapter Loading the
dishwasher.
Electrical connection
Information about the electrical connection
can be found on the serial number plate.
This specification must match the
electricity supply.
The dishwasher must be connected to an
earthed socket.
The electric wall socket must be placed
outside of the installation area to be easily
accessible after installing the dishwasher.
Do not use an extension cord!
NOTE!
Repairs and maintenance relating to
safety or performance must be carried
out by a qualified professional.
Remove dishwasher worktop
The dishwasher can be installed in a
recess without its worktop. If the
dishwasher's worktop is removed, the
dishwasher must be installed so that it is
enclosed on both sides and is under a
separate worktop. If the dishwasher is
installed so that one of the sides is visible,
a brace must be fitted to the rear edge of
the dishwasher. Accessories can be
purchased where you bought the
dishwasher.
1
2
3
2x
For recess installation, see the section
Placing the dishwasher.
29
