AirRing
5
DEFLATING AND PUTTING AWAY
•
Step 1: Flip the tabs off the top of the valves. For deflation, depress and turn the plunger
clockwise before inserting pump.
•
Step 2: The pump must be in a reverse setting.
•
Step 3: Deflate completely until all the air is out of the product. Then turn the plunger up to
close the valve. This prevents air from being pulled back into the unit.
•
(If you do not have the use of a vacuum blower do the following):
Exposed valve, with plunger pushed in
“Deflate” side (see writing on right side)
Hose attaches to “deflate” side here
Hold nozzle inside valve
