5
6
1
2
3
4
Note: The LED will blink 3x after powering on.
Note: Please check polarity and wire configuration.
Incorrect wiring can permanently damage camera.
Download the GoPro Quik App
Insert SD Card
Connecting to Your Drone
Pairing with the App
Finishing Pairing with the GoPro Quik App
Aim your GoPro camera lens at the QR code to begin
pairing with the GoPro Quik app on your phone.
Note: The LED will blink 2x to confirm QR has been read.
The GoPro Quik app is the easiest way to switch
modes, adjust settings and frame your shot.
Note: Your camera must be within 1 meter of your phone to pair with the
GoPro Quik app. Auto Upload is not supported by HERO10 Black Bones.
Powering On
GH 1.5 3pin Connector
Power
Ground
Shutter
130-32240-000 REVB
© 2022 GoPro, Inc. All rights reserved. Model/Modelo: CPBN1
5-27v
2S-6S
Connect to
flight controller,
Max 5V
We Found
Your GoPro
Pair Camera
Set up
Au
Upload Footage
while Charging
Later
