Gopel Electronic G CAR 6282, Manual

Page: 20 / 34

CHAPTER 3. TECHNICAL DESCRIPTION GÖPEL electronic GmbH
ground of the power supply is on earth. The power adapter has the following specifications:
Table 3.8: Spezifications of the Power Adapter
Property Value Unit Comment
Model BET-0600
Cable length 1.5 m
AC Input voltage 90 .. 264 V
DC Output voltage 12 V
DC Output current 5000 mA
Operating temperatur -20 .. +60 °C
Power 60 W
Ripple 120 mV Peak to peak
Weight 300 g
Type of input connector IEC socket
The device-side connector is a 3-pin M8 socket from PHOENIX CONTACT (Item No. 1456035; plug side: 1681172).
Figure 3.5: Schematic drawing of the socket of the power supply
The following table shows the pin assignment of the connector:
Table 3.9: Pin assignment of the power supply
Pin Signal
Housing GND_SHELL
1 V_ISO_IN
3 GND_ISO_IN
4 GND_SHELL
When delivered, GND_SHELL and GND_ISO are not connected. Between the two signals is only a 100nF
/ 250V ceramic capacitor. Please place the signal GND_SHELL on the test objects ground or earth.
3.4.6 Galvanic Isolation
Overvoltages can damage expensive test equipment or lead to unsafe test results. The potential separation
protects against overvoltages and can suppress dangerous surges. It also prevents ground loops responsible for
G CAR 6282 15