First Steps
basicCON 4121 – User Manual
3-1
3
Video Dragon – First Steps
Requirement for these steps is a proper installation of the
GOEPEL
electronic
G-API
and the
LvdsViewer
software (see separate
manuals).
The
Video Dragon
basicCON 4121
can be used with different
Media
Interface Modules
For this First Steps chapter it is assumed that the DS90UB926
Grabber module is used and a compatible video source is already set
up and ready to use.
3.1
Assembly of the System
Install the corresponding Module (here the DS90UB926) in the
Media Interface Slot. (Typically this step is not necessary, as
one module is already installed on delivery of the device.)
Connect the video source using the supplied video cable with
the input connector of the
Media Interface Module
.
Power up the
basicCON 4121
using the delivered power supply.
(As soon as the device is ready to use, the status LED 2 starts
blinking.)
Connect the
basicCON 4121
hardware to your PC/ laptop either
by using the supplied USB cable (when doing that for the first
time, the Windows
®
system messages for driver installation
appear) or by using an Ethernet cable.
