Hardware
2-32
basicCON 4121 – User Manual
The DS90UB925 interface module is a Generator module supporting
the FPD-Link III standard (Flat Panel Display Link.
It includes the DS90UB925Q transmitter of Texas Instruments.
The module has the following characteristics:
Backward compatible to FPD-Link II
HD Video resolution and Pixel clock frequency up to 85 MHz
I2C interface
UUT supply
The module includes a “D4S20D-40ML5-Z” type connector of
Rosenberger, marked as “Output”. The Video signal is output via this
connector.
The following table shows the assignment of the “Output” connector:
Pin
Signal
Annotation
1
SD_OUT_N
Serial data output negative
2
V
UUT
Plus pole UUT supply
3
SD_OUT_P
Serial data output positive
4
Ground
Ground
The electrical signal properties correspond to the FPD-Link standard.
2.4.8
DS90UB925