Shenzhen Gooxi Technology Co., Ltd.
LAN4
I210 1000M Data LAN port 4 (This port is not available when
G2SCN-2B supports 10G LAN port)
J18
USB3.0
USB3.0 stacked double connector
J24
BATTERY
Lithium battery holder
J12
HDMI(VGA)
HDMI connector, but the actual signal is VGA, need to customize
HDMI to VGA Cable
J21
Mezzanine
Mezzanine connector, pin board connector to PCIEX8 signal, used
to plug 82599 million mega cards
The LAN3 LAN4 cannot be attached when the card is inserted, or
the mechanism interferes
J11
PCIEX16
PCIEX16 connector, actually with PCIEX8 signal, for PCIE riser card
J10
ME Update
For ME upgrade pin, insert jump cap effective
J15
Clear CMOS
Clear the CMOS pin, the default is not to take the jump cap, plug
in the jump cap is valid
J14
ME Recovery
Force the ME to restore to the default state. By default, skip caps
are not enabled.
J13
CPLD JTAG
CPLD JTAG connector for burning CPLD program
J3
DIMM A0
DIMM Channel A DDR4 SLOT0
J6
DIMM A1
DIMM Channel A DDR4 SLOT1
J7
DIMM B0
DIMM Channel B DDR4 SLOT0
J8
DIMM B1
DIMM Channel B DDR4 SLOT1
J9
Signal Pin Pin
2*10 20pin pin pin, used to transmit signal with MIB
J26
2.2 Motherboard IO Interface
2.2.1
N
ODE BUTTON
Node switch button In the front of the chassis, press the button to start the
node system. The position indicates the blue arrow below
