Goodwe GW1000-XS User Manual Download Page 35 | Manualshive

Page: 35 / 55

Goodwe GW1000-XS User Manual Download Page 35

31

08 System Commissioning

User Manual V1.0-2022-10-30

8 System Commissioning

8.1 Indicators and Buttons

Indicator

Status

Description

ON = WiFi is connected/active.
BLINK 1 = WiFi system is resetting.
BLINK 2 = WiFi not connect to the router.
BLINK 4 = WiFi server problem.
BLINK = RS485 is connected.
OFF = WiFi is not active.
ON = The inverter is feeding power.
OFF = The inverter is not feeding power at the moment.

ON = A fault has occurred.

OFF = No fault.

Faulty

Operating

Power

8.2 Setting Inverter Parameters via LCD

NOTICE

• Inverter software version shown in this document is V1.00.00.13. The screenshots are for

reference only. The actual interface may differ.

• The name, range, and default value of the parameters are subject to change or adjustment.

The actual display prevails.

•

To prevent the generating capacity from being influenced by wrong parameters, the power

parameters should be set by professionals.

«
...
33
34
35
36
37
...
»

Summary of Contents for GW1000-XS
























































Reviews:

No comments