manualshive.com logo in svg

Goodwe GW1000-XS, User Manual, Page: 11 / 55

Share
Download
Goodwe GW1000-XS User Manual Download Page 11

7

User Manual V1.0-2022-10-30

03 Product Introduction

3.4 Appearance

3.4.1 Parts

No.

Parts

Description

1

DC Switch(optional)

Optional. During normal operation it is in "on" state, 

it can shut down the inverter after it is disconnected 

from the grid by the AC breaker.

For Australia and New Zealand: With DC Switch.

2

PV Input Terminal

Used to connect the PV module DC input cables.

3

WiFi/LAN/4G Communication 

Module Port

•  Connect a communication module like Bluetooth, 

WiFi, LAN, 4G, etc. The module type may differ 

depending on actual needs.

•  Connect the USB-RS485 cable in Brazil.

•  Update the software version of the inverter using 

a USB flash driver.

4

RS485/DRED/CT/Remote 

Shutdown Communication 

Cable Port(optional)

Optional. Used to connect the RS485, DRED, CT, or 

Remote Shutdown communication cable.

5

AC Output Terminal

Used to connect the AC output cable, which connects 

the inverter and the utility grid.

6

PE Terminal

Used to connect the PE cable.

7

Indicator

Indicates working state of the inverter.

Summary of Contents for GW1000-XS
























































Reviews:

No comments