background image

6

GENERAL CONTROLS

STANDBY/ON – 

To exit the demo mode, switch the system on or turn the system to standby mode. Standby mode readies the

system for remote use (power ON) and as a back-up to the systems clock/timer features.

TUNER/BAND –

 Press to select TUNER mode:  when in TUNER mode, press to select the waveband: FM or MW.

EQ – 

Press to select the desired sound effect: POP, CLASSIC, ROCK, JAZZ or FLAT.

DBBS –

 Press to switch ON/OFF X-BASS mode.

RANDOM – 

When in CD mode, press to start or stop random play mode. This allows the CD to play all tracks in a random order

(shuffle play).

CD/DISC SKIP – 

Press to select CD mode. When in CD mode, press repeatedly to change to desired disc tray.

ST/MONO/BEAT CUT – 

To switch between stereo/mono mode (on FM band only) for TUNER. To select the beat-cut function for

MW recording.

DEMO/COLOUR –

 To activate/deactivate the demonstration for DEMO. Seven colours may be cycled on the display (as well as

no back light).

 / 

 

VOLUME

 

– 

To increase or decrease the volume (see display for range – 1 = Volume Minimum and 40 = Volume Maxi-

mum).

 

STOP –

1. Stop CD play.
2. Clears CD program from memory (when pressed twice).
3. Stop Program for Tuner

 

SKIP/SEARCH/TUN. DOWN

 or  

 

 SKIP/SEARCH/TUN. UP – 

To search backward/forward or to skip to the previous/next

track for CD. To tune to a lower or higher radio frequency or to search radio stations for TUNER.

PRESET –

1. To select a preset radio station for TUNER.
2. To set the hour and minutes for Clock.
3. To set timer function for Timer.

 

PLAY/PAUSE

 

– 

To start or interrupt playback for CD.

 

(DISC 1, DISC 2, DISC 3)

 

– 

Press to directly play the selected disc.

INTRO/RDS SEARCH – 

Play the first 10 seconds of all songs on the selected CD. To search desired program type broadcast

station.

REPEAT/RDS –

 Repeat CD play of 1 track or ALL tracks on the CD. To change RDS information.

MEM/SET –

1. To program disc tracks for CD.
2. To program preset radio stations for TUNER.
3. To set or reset clock for Clock.
4. To set or reset timer for Timer.

TIMER – 

Press to switch the timer ON/OFF.

CLOCK –

1. To view the clock during play mode of CD, tuner, or cassette.
2. To set the clock.
3. To set the timer.

SLEEP – 

To select the sleep time.

COLOUR – 

Select one of seven (7) colours (or no backlight) for your display background.

REMAIN – 

To select the CD time remaining.

AUX – 

To select the auxiliary input source or turn the system on AUX mode at standby mode.

TAPE – 

To select the TAPE mode or turn the system on TAPE mode from standby mode

DISC OPEN/CLOSE (DISC 1, DISC 2, DISC 3) – 

To select the DISC to open or close..

MUTE – 

To momentarily stop the sound press the MUTE button. To restore sound, press it a second time. MUTE feature only

stops the sound, normal play continues.

Summary of Contents for MICRO1530

















Reviews: