GMC01
USB Operation
The USB slot can be used for music playback from USB pen drives or MP3 players using a
USB cable (not supplied).
1. Connect your USB device to the CD Micro System.
Connecting External Devices
2. If the CD Micro System is not in external mode, press the FUNC button until you reach
external mode.
The AUX in port can be used for music playback from MP3 players or other devices using a
phono cable (not supplied).
1. Connect your device to the CD Micro System.
2. If the CD Micro System is not in external mode, press the FUNC button until you reach
external mode.
3. If required, switch on your device.
The playback operation is controlled by your device and the buttons on the remote control or
on the control panel of the CD Micro System.
If you have connected a USB device, such as an MP3 player, the playback operation is
controlled by your USB device and the buttons on the remote control or on the control panel
of the CD Micro System.
If you have connected a USB pen drive, the playback operation is controlled by the buttons on
the remote control or on the control panel of the CD Micro System.
Note:
Due to variance in MP3 encoding and digital music formats some MP3 players may not
play via the USB port. If this is the case, connect your MP3 player to the AUX port using a
phono cable (not supplied).
3. If required, switch on your USB device.
4.9
4.10
AUX Operation
