Gondzik NL-BKDX100-400II/R, User Manual

Page: 11 / 42

11
III. Installation
1. Heat pump installation
(1) Installation location
◆
The heat pump must be installed exclusively outside the home and, where possible, in a completely
clear area. If a protection is needed around the appliance, it should have wide openings on the 4 sides
and the installation separations indicated in the following figure must be respected. No obstacle should
prevent the circulation of air through the evaporator and the fan outlet.
Inlet/outlet
gas-max
working
pressure
4.2MPa 4.2MPa 4.2MPa 4.2MPa
High/low
pressure-max
working
pressure
4.2MPa 4.2MPa 4.2MPa 4.2MPa
Heat
exchanger
max working
pressure
4.2MPa 4.2MPa 4.2MPa 4.2MPa