-
3-
SPECIFICATIONS
Model Name
EX-36KRS
Technical
EX-36KRS-TX
EX-36KRS-RX
Role of usage
Transmitter [TX]
Receiver [RX]
SDI standards
SD-SDI/ HD-SDI/ 3G-SDI/ 6G-SDI/12G-SDI
Auto HD/SD-SDI detection
Yes
Supported protocols
SMPTE 259M (270Mbps), DVB ASI (270Mbps)
SMPTE 292M / HDTV (1.485Gbps and 1.485/1.001Gbps)
SMPTE 424M / HDTV (2.97Gbps and 2.97/1.001Gbps)
SMPTE 2081 / HDTV (5.94Gbps and 5.94/1.001Gbps)
SMPTE 2082 / HDTV (11.88Gbps and 11.88/1.001Gbps)
Video bandwidth
[11.88Gpbs & 11.88/1.001Gbps]
Video support
720p50/59.94/60, 1035i50/59.94/60, 1080i50/59.94/60,
1080p24/30,1080p60,1080p59.94,
4K2K29.97, 4K2K30, 4K2K59.94, 4K2K60
[email protected], PAL@50Hz
SDI signal type
SMPTE 2081, SMPTE 2082, SMPTE-424M, SMPTE-292M, SMPTE-259M,
DVB-ASI
Output impedance
75
Auto reclocker mode
270Mbps / 1.483Gbps / 1.485Gbps / 2.97Gbps / 2.967Gbps /
5.94Gbps / 5.934Gbps / 11880Gbps / 11868Gbps
Fiber Transmission
10km (6.25mi)
Audio support
Yes
RS-232/422/485 support
Yes
RP-198 pathological patterns
Immune
PCB Stack-up
4-layer board [impedance control — differential 100
; single 50
]
Input
1x SDI
1x Optical LC (SFP)
Output
1x Optical SFP [SDI]
1x SDI (Loopout)
1x SDI
BNC connector
75
inter-locked socket
Optical fiber connector
SFP-type
Mechanical
Housing Metal
case
Dimensions
[L x W x H]
Model
Package
Carton
Weight
Model
Package
610g [1.3 lbs]
Fixedness
Inter-locked power supply
Power supply
12V
Power consumption
Watts [max]
Watts [max]
Operation temperature
0~40°C [32~104°F]
Storage temperature
-20~60°C [-4~140°F]
Relative humidity
20~90% RH [no condensation]
-
4-
PANEL DESCRIPTIONS
Transmitting unit
►
EX-36KRS-TX
1.
Dip Switch PIN#1 LED:
LED is bright when pin#1 switches to
RS-422/485 mode
[
]
2.
2-PIN Dip Switch
3.
Dip Switch PIN#2 LED:
LED is bright when pin#1 switches to
Full Duplex mode
[
]
4.
RS-232/422/485 LED indicator (Red):
When RS-232/422/485 transmit the signal, the LED is bright
5.
RS-232/422/485 LED indicator (Green):
When RS-232/422/485 receive the signal, the LED is bright
6.
RS-232/422/485 (terminal block format):
The order of RS-232/422/485 pin are RX-, RX+, TX-, TX+,
GND (from the left side to the right)
7.
SDI loopout:
Connect to a 12G/6G/3G/HD/SD-SDI display
8.
SDI input:
Connect to a 12G/6G/3G/HD/SD-SDI source
9.
LED indicator:
[Blinking green & Blinking red] No SDI in signal & no RS-232/422/485 link
[Solid green & Blinking red] Receive the SDI in signal & no RS-232/422/485 link
[Solid red & Blinking green] RS-232/422/485 link & no SDI in signal
[Solid green] Both receive the SDI in signal & RS-232/422/485 link
10.
Optical:
Link to the receiving unit EX-36KRS-RX (Module: [Left] SDI; [Right] RS-232/422/485)
11.
Micro USB:
F/W update
12.
Power jack:
12V DC power
13.
Power LED indicator
DIP Switch Position
Description
PIN#1
ON [
]
RS-422/485 mode
OFF [
]
RS-232 mode
PIN#2
ON [
]
Full Duplex mode for RS-232/422/485
OFF [
]
Half Duplex mode for RS-485