GoMax Electronics MA-5422H User Manual Download Page 17

15

 

WARRANTY 

The SELLER warrants the 

MA-5422H 

4x2 HDMI 2.0a Matrix

 free from defects in the material and 

workmanship for 1 year from the date of purchase from the SELLER or an authorized dealer. Should this 
product fail to be in good working order within 1 year warranty period, The SELLER, at its option, repair or 
replace the unit, provided that the unit has not been subjected to accident, disaster, abuse or any 
unauthorized modifications including static discharge and power surge. This warranty is offered by the 
SELLER for its BUYER with direct transaction only. This warranty is void if the warranty seal on the metal 
housing is broken. 

Unit that fails under conditions other than those covered will be repaired at the current price of parts 

and labor in effect at the time of repair. Such repairs are warranted for 90 days from the day of reshipment 
to the BUYER. If the unit is delivered by mail, customers agree to insure the unit or assume the risk of loss 
or damage in transit. Under no circumstances will a unit be accepted  without a return authorization 
number. 

The warranty is in lieu of all other warranties expressed or implied, including without limitations, any 

other implied warranty or fitness or merchantability for any particular purpose, all of which are expressly 
disclaimed. 

Proof of sale may be required in order to claim warranty. Customers outside Taiwan are responsible 

for shipping charges to and from the SELLER. Cables and power adapters are limited to a 30 day 
warranty and must be free from any markings, scratches, and neatly coiled. 

The content of this manual has been carefully checked and is believed to be accurate. However, The 

SELLER assumes no responsibility for any inaccuracies that may be contained in this manual. The 
SELLER will NOT be liable for direct, indirect, incidental, special, or consequential damages resulting 
from any defect or omission in this manual, even if advised of the possibility of such damages.

 Also, the 

technical information contained herein regarding the MA-5422H  features and specifications is 
subject to change without further notice. 

 

 

Summary of Contents for MA-5422H


















Reviews: