FS 190
Operating instructions
- 16-
02821900988
5005967-04
Attention: When handling oil, grease and other chemical substances, observe the
product-related safety regulations!
For maintenance jobs the machine has to be shut down. For maintenance jobs which must be done
while the machine is running, the blade has to be dismounted before beginning the job.
6.2 Lubricating chart
Grease the bearings of the blade shaft every 20-30 working hours with heat resistance fat. Clean
periodically lose parts like pointer unit and wheels and grease them with some drops of oil.
6.3 V-belts
Check periodically the correct tension of the V-belts. If the machine is new or a new set of V-belt was
mounted check the tension after 8 working hours. Deflexion in the middle approx. 2.9 mm (0.115 ") -
maximum deflexion force 11 N. Always use a set of V-belts.
