GÖLZ Bridge Saw Original Operating Manual Download Page 47 | Manualshive

Page: 47 / 86

GÖLZ Bridge Saw Original Operating Manual Download Page 47

12

Spare parts list

47 / 86

12

Spare parts list

12.1

Use of the spare parts list

The spare parts list is not an assembly or disassembly instruction. The spare parts list serves exclusively to find
spare parts quickly and easily, which can be ordered from the sales offices.

12.2

Sales offices

Deutschland - Germany - Allemagne - Duitsland

GÖLZ

®

GmbH

Dommersbach 51
DE-53940 Hellenthal
Tel:   +49 (0)2482-12 200
Fax:  +49 (0)2482-12 222
E-Mail: [email protected] / Internet: www.goelz.de

Österreich - Austria - Autriche - Oostenrijk

GÖLZ

®

Ges.m.b.H

Samstraße 52
A-5020 Salzburg
Tel: +43 (0) 662 - 43 81 75
Fax: +43 (0) 662 - 43 07 34
E-Mail: [email protected] / Internet: www.goelz.at

Frankreich - France - France - Frankrijk

GÖLZ

®

S.A.S.

1, rue de la Mairie
F-67370 Berstett
Tel: +33 (0)3.88.59.43.00
Fax: +33 (0)3.88.59.47.77
E-Mail: [email protected] / Internet: www.golz.fr

Großbritannien - Great Britain - Grande-Bretagne -
Groot-Brittannië

GÖLZ

®

(UK) Ltd.

Unit A5, Springhead, Enterprise Park
Northfleet
Kent DA11 8HB
Tel: +44 1 474321679
Fax: +44 1 474321477
E-Mail: [email protected] / Internet: www.goelz.co.uk

Benelux

GÖLZ

®

Benelux

Eupener Straße 61
BE-4731 Raeren-Eynatten
Tel: +49 (0)2482-12 200
Fax: +49 (0)2482-12 222
E-Mail: [email protected] / Internet: www.goelz-online.com

Australien - Australia - Australie - Australië

GOLZ

®

Pty Ltd.

44 Stanley Street
Peakhurst, NSW 2210
Tel: +61 (0) 2 9534 5599
Fax: +61 (0) 2 9534 5588
E-mail: [email protected] / Internet: www.golz.com.au

USA

GOLZ

®

L.L.C.

5860 East Osage Ridge Lane
Columbia MO 65203-6018
Tel: +1 573 474 4961
E-Mail: [email protected] / Internet: www.goelz-online.com

DANGER!
Risk of injury from mounting or dismounting assemblies!

Using the spare parts list for assembly or disassembly purposes can lead to serious personal
injury or even death!

-

For assembly and disassembly work, only the corresponding descriptions in the operating

instructions must be followed.

NOTE!
To avoid wrong deliveries, the details in the order should be checked for correctness and
completeness before dispatch! Complete delivery address!

«
...
45
46
47
48
49
...
»

Summary of Contents for Bridge Saw























































































Reviews:

No comments