Assembling the trolley:
■
Fit the longitudinal axis to the drive axis (Fig. 1).
■
Fit the drive (rear) wheels: push in the pin on the
wheel hub and click the wheel into place.
Note:
Click once = freewheel mode (smooth manual
operation). Click twice = motor mode. Ensure that
both wheels have been correctly fitted by listening
for the number of clicks. The tire profiles should face
the direction of travel (like front wheel) (Fig. 2).
■
Attach the caddy frame and adjust to desired height
(Fig. 3).
■
Lower bag rest: lift and turn in the direction of travel.
■
Upper bag rest: click into desired position and secure.
■
Attach the battery to the trolley (using the 2 Velcro
straps) and plug in the cable (Fig. 4).
■
Scorecard holder: screw on to the caddy frame if
desired (tighten the screws using the Allen key).
■
Umbrella holder: slide the holder over the mechan-
ism on the steering handle (when needed) and turn
clockwise to tighten. The elastic strap secures the
umbrella in the wind.
■
Place your golf bag on the trolley and secure it
to the two holders using the elastic strap.
Important:
Before using the battery for the first time,
it should be charged continuously for at least 6 hours.
■
Red lamp = battery charging
■
Green lamp = battery charged
Initial start-up
12
1
2
3
4
User Manual_Golftrolley 2015_Print.indd 12
24.12.14 08:53
