background image

 

4

1. PRELIMINARIES 

 
 
 

The Goldmund Logos Mini use some very innovative technology to achieve a level of 
definition and neutrality never found before in a speaker system. 
 
Please read very carefully the following instructions. These high-precision speakers 
are extremely revealing and can provide the best sound only if they are used 
properly. 
 
For exacting technicians, musicians, and all those who demand the very best in 
audio reproduction, we strongly recommend the use of the best associated 
components, especially electronics and cables (see paragraph 5.). 

 
 
 
 
 
 

2. UNPACKING 

 
 
 

ATTENTION :

  If you need to return the speakers to the factory or to your local 

representative for a warranty repair, please note that it must be repacked in the 
original packing. Otherwise new packing will be charged as well as the repair of 
damages occurred due to poor packing conditions. 
 
It is easier to be two people to install the Logos, since the speakers are heavy and 
some handling steps necessitate a lot of care. 
 
Open the carton and remove the speaker. If you have purchased the Logofoot to 
support the Logos Mini, open the foot box too and remove the parts. Unpack the 
speaker close to the location where it will be standing. 
 
 
 
 
 
 

 
 
 
 
 
 
 

Summary of Contents for LOGOS MINI







Reviews: