13
MOUNT MIDDLE H-FRAME
Note: For this step, ensure the Middle H-Frame is being used.
Note: Hinge Bushings are preinstalled on Side Beam.
1.
Align the mounting holes on the Middle H-Frame hinge plate
with the Hinge Bushings located on the Side Beam as shown
in Figure 10.
2.
Insert one (1) 1/8” Cotter Pin into one (1)
1
” Hinge
Pin, bending
the tines of the Cotter Pin outward and apart, securing the
Cotter Pin within the Hinge Pin.
3.
Attach a Lollipop Washer to the open end of the Hinge Pin.
4.
Slide the Hinge Pin through the hinge plate as shown in
Figure 10.
5.
Insert one (1) Lollipop Washer and one (1) 1/8” Cotter Pin into
the protruding end of the Hinge Pin, bending the tines of the
Cotter Pin outward and apart, securing the Cotter Pin within
the Hinge Pin.
6.
Repeat this step for the opposite side of the Middle H-Frame.
PARTS REQUIRED TO MOUNT MIDDLE H-
FRAME
Middle H-Frame
Lollipop Washer
(4)
1/8” Cotter Pin (4)
1” x 5
-
3/8” Hinge Pin (2)
