BAC-601LCD (MP4/SP4) User’s Guide
5
5.3
PAS Levers
When LCD is on,short press"UP"or "DOWN" button switching the electric vehicle PAS
levers and changing the vehicle's outputting power.
There is 0- 5 levers for option:
0:No power
5:The highest lever
When LCD is on ,PAS lever is at "0" by default.
Here is the 0-5 levers for your reference:
5.4
PAS Mode
Long Press "DOWN" button ,the electric vehicle enters into PAS mode.
Electric vehicle will drive at constant speed 6km/h.
5.5
Battery Guage
When the battery voltage is higher than the 5 segment voltage setted by the
controller , all the battery gauge are bright ; when the battery is under voltage with
one segment and blinking , you need to charge the battery right now.
.....
6KM/H PAS Mode only can be used when rider pushes the electric vehicle.Do not use
6KM/H PAS Mode when you are riding .
Under voltage and flashing
Summary of Contents for BAC-601 LCD
Page 1: ...BAC 601 LCD MP4 SPM4...
Page 4: ...1 1 Real Picture and Size...
