737 MAX Flight Crew Operations Manual
Supplementary Procedures -
Flight Management, Navigation
SP.11.22
MN-FLT-OH-201
Entering New Time Error Tolerances for RTA Navigation
PERF LIMITS page ....................................................................... Select
Enter desired time error tolerance (5 to 30 seconds) for the RTA
waypoint on line 1L (Example: 25). Observe MOD PERF LIMITS
page displayed and EXEC key illuminated.
EXEC key ........................................................................................ Push
Observe ACT PERF LIMITS page displayed.
Additional CDU Functions
Navigation Display Plan Mode (Center Step Operation)
EFIS Control Panel Mode Selector ................................................PLAN
RTE LEGS page ............................................................................. Select
EFIS Control Panel Range Selector ...................................... As required
MAP CTR STEP key ....................................................................... Push
Each push moves the CTR label to the next geographically fixed
waypoint in the route. Selecting PREV PAGE or NEXT PAGE
moves the CTR label to the first geographically fixed waypoint on
the new page.
EFIS Control Panel Mode Selector ....................................... As required
Enter Position Shift on Runway
YA201 - YA605, YA611 - YL815, YN107 - YV671
TAKEOFF REF page ..................................................................... Select
YA201 - YA605, YA611 - YA657, YB104 - YB271, YC453 - YD256, YF631 - YF703, YF832 - YL815, YN107 - YT708
TO SHIFT distance (as intalled) ......................................................Enter
Enter distance desired from runway threshold. When TO/GA is
pushed, FMC will update position to runway threshold plus entered
distance.
YA683, YA684, YC095, YD303, YD307, YF801, YV401 - YV671
RWY REMAIN distance (as installed) ............................................Enter
Enter runway remaining distance. When TO/GA is pushed, FMC
will update to the runway remaining distance.
If position shift must be removed
RTE page.............................................................................. Select
March 1, 2021
