Double
‐
stage tank regulator PS 25 bar
3 / 16
GENERAL PRODUCT INFORMATION
The product keeps the specified outlet pressure constant within defined limits regardless of
fluctuations in the inlet pressure and changes in flow and temperature.
This pressure regulator has passed the test for malfunctions such as ice/hydrate formation
and for this reason is marked "E" (DIN 4811-E). However, under certain circumstances, the
pressure regulator may ice up. To prevent icing, we recommend you use regulator heating
type ES2000 (Part No. 05 220 00).
INTENDED USE
Operating media
•
LPG (gas phase)
You will find a
list of operating media
with descriptions, the relevant
standards and the country in which they are used in the Internet at
www.gok-online.de/de/downloads/technische-dokumentation.
Place of operation
Must not be used in potentially explosive ex-zone 0!
Can cause an explosion or serious injuries.
Installation outside ex-zone 0.
May be used in potentially explosive ex-zones 1 or 2.
Installation by a company that specialises in explosion protection
(ATEX Directive 1999/92/EC).
Installation within defined ex-zones 1 or 2.
•
operate in buildings, in special installation rooms (acc. to TRF 2012) and outdoors
If used in buildings, a ventilation line must be installed from the breather of the product to
outdoors!
Installation position
•
optional
•
observe installation direction
INAPPROPRIATE USE
All uses exceeding the concept of intended use:
•
e.g. operation using different media, pressures
•
use of gases in the liquid phase
•
installation against the flow direction
•
operation with inappropriate hoses
•
changes to the product or parts of the product
•
Use at ambient temperature varying from: see TECHNICAL DATA
