6
Hardware Installation
1.
Power off all devices including your HDMI source
and HDMI display(s).
2.
Install the included antennas to the TX and RX.
3.
Connect your HDMI source device to the
Transmitter's HDMI Input connector with an HDMI
cable (HDMI cable not included).
4.
Optional: Connect your local HDMI display to the
Transmitter's Local HDMI Output connector with
an HDMI cable (HDMI cable not included). This
connection allows you to monitor the HDMI signal
from the source device location.
5.
Optional: Connect the IR Blaster cable to the
Transmitter's IR interface port. Face the eye
towards your HDMI source device's IR window.
This connection is needed only if you need to
control your HDMI source from the remote
location.
6.
Connect your HDMI display to the Receiver's
HDMI Output connector with an HDMI cable
(HDMI cable not included).
7.
Optional: Connect the IR Receiver cable to the
Receiver's IR interface port. This connection is
needed only if you need to control your HDMI
source from the remote location.
8.
Plug your keyboard and mouse into the USB ports
of the Receiver (RX) unit.
9.
Plug the included power adapters into the
Transmitter's and Receiver's Power Jacks, then
plug both power adapters into reliable power
outlets. Power on the transmitter and receiver.