6
Figure 2: Receiver (RX)
Product Layout Continued
1.
Power Jack
: Connects to the included power adapter
2.
Power LED
: On when the Receiver is powered on
3.
Reset Button
: Press and hold down for 5 seconds to
restore to factory settings (requires re-pairing to TX)
4.
HDMI Out
: Connects to your HDMI display
5.
IR In
: Connects to the included IR Receiver cable
Pairing the TX and RX
The TX and RX in the kit are paired at the factory and do
not require pairing, however, when using the Reset
function re-repairing is required. Additional Receivers
must be paired to the Transmitter (TX) before installation.
1.
Power on the TX and RX and wait 30 seconds.
2.
Connect an HDMI cable between the TX's HDMI In
port and RX's HDMI Out port and wait 10 seconds.
3.
Disconnect the HDMI cable from the TX and RX.
4.
Power cycle the TX and RX to complete the pairing.
Note
: Repeat the pairing process if pairing fails.