Goelst G-Motion, Manual

Page: 15 / 44

11
2
gevoed met 230V
basis, Control PCB met RS485 doorkoppel
openingen zichtbaar en Wifi ant.
gevoed met 24V
aansluiting overzicht
(zonder afgebeelde
voedingsingangen)
conn:
basis
gevoed met 100V-240V,
fasegeschakeld
English
Preparation
connections for wired controls, dependent on motor type :
Detailed pin layouts for RJ11 and RJ45, refer to p. 35.
Detailed wiring diagrams are available at www.goelst.com.
After placing the motor unit on to the curtainrail system and powering the motorunit, the
system is now ready for self calibration, see next chapter.
2.4 Wired connection types
connector : RJ11 or RJ12 (2x)
protocol : RS485
use : tandem systems
connector : 3 pins
protocol : analog signal
use : Dusk/Dawn sensor
connector : RJ45
protocols : RS232
use : dry contact
: infrared receiver