21
©Godiva Ltd. Our policy is one of continuous development. We therefore reserve the
right to amend specifications without notice or obligation.
Oil Filling Points
The unit is supplied
without
oil and must be filled with the correct quantity and
specification before starting the pump.
The oil filling points for the compressor and pump bearing housing are located at the
left side of the pump (viewed from suction tube).
The pump gearbox filling point depends on the gearbox position in relation to the
pump.
Gearbox in Down Position
Oil filling point
For oil type and capacity refer to
Recommended Lubricants
Oil level check
Compressor oil filling point.
Note: the plug has a grooved
thread to allow for a controlled
release of internal pressure.
For oil type and capacity refer
to Recommended Lubricants
Pump bearing housing oil
filling point and oil level check
dipstick
Compressor oil filter
Compressor oil level – mid
point on site glass
Air Cleaner