B l u e B o x – M e n u O p e r a t i o n
GO Systemelektronik GmbH Faluner Weg 1 24109 Kiel Germany Tel.: +49 431 58080-0
Fax: -58080-11
Page 45 / 96
www.go-sys.de
8.2.1.1.5.1.1 Setting IP Address (UDP)
Menu UDP settings 8.2.1.1.5.1
Here you can enter the IP address of the destination computer in the Internet, to which the measuring data is
transmitted. The UDP protocol via port 14112 is used for the transmission. The current IP address is displayed.
Enter the IP address using the numeric buttons in the marked block.
If an access to the BlueGate server has been ordered from GO Systemelektronik, the IP address is set to the
standard address 212.51.30.18 on delivery of the BlueBox.
Selects the next block of the IP address.
Even works with
on a block.
After confirmation, sets the setting to "0.0.0.0.0".
Saves the entry and switches back to the Network menu of the UDP settings.
3. BlueGate Settings:
IP Address
212.51.30.18
Password BlueGate
xxxxx
see
6 The Configuration Data Sheet
see also
8.2.1.1.5.2 Gateway Settings (Internet)
IP address
IP address
OK
–>
OFF
0
7
8
9
4
5
6
1
2
3
0
0
0
0
–>
OFF
OK
