Go Power Dura Lite Solar Controller, User Manual, Page: 10 / 17

SOLAR CONTROLLER
_______________________________________________________________________
10
© 2020 Go Power!
Solution 2
Your battery may be too far discharged to accommodate the controller. Keep the
solar kit plugged in and placed in full sun for a few hours and try the controller
again.
Flashing
Solution
This is an Overvoltage Error. The battery voltage is too high. Disconnect the
DuraLite kit and plug in a power draw to lessen the voltage in the battery.
Flashing
Solution
This is an Over Discharge Error. The battery voltage is too low. Connect the
DuraLite kit to charge the battery.
7.0
Display Symbols
Icon Motion Issue
Solid
The system is normal but not
charging
Energy bars are
Flashing
Charging
Solid Full
Flashing Battery Overvoltage
Flashing Battery Over Discharge
8.0
Frequently Asked Questions
(FAQs)
Before a problem is suspected with the system, read this section. There are
numerous events that may appear as problems but are in fact perfectly normal.
Please visit https://gpelectric.com/support/ for the most up-to-date FAQs and
troubleshooting videos.
It seems like my flooded batteries are losing water over time.