GNATUS BioQualyAir 40L, Installation And Maintenance Manual

Page: 14 / 28

14
The Equipment maintains its condition of safety and efficacy, provided that it is
maintained (stored) as mentioned in this instruction of use. Thus, the equipment will
not lose or alter its physical and dimensional features.
Before transporting the compressor, all air from the tank must be exhausted.
- The equipment should only be operated by duly enabled and trained technicians
- If any maintenance should be required, only use services of the Gnatus Authorized
Technical Assistance.
- Although this equipment has been planned in accordance with the standards of
electromagnetic compatibility, it can, in very extreme conditions, cause interference with
other equipment. Do not use this equipment together with other devices very sensitive to
interference or with devices which create high electromagnetic disturbance.
- Avoid spilling water or other liquids inside the equipment, which could cause short
circuits.
- Do not allow patients and especially children get close to the compressor.
- Gnatus air compressor is designed for use according to its air flow capacity, while using
it, does not exceed their technical specifications. Gnatus assumes no liability for damages/
accidents resulting from improper use or non-compliance with the instructions described
in this manual.
- Do not touch the compressor head (the upper cooling part) during operation, even after
the compressor is turned off, those parts still remain hot for some time, so avoid contact.
- Make sure periodically that the air inlet and outlet are not obstructed.
- If there is power outage, it is recommended to turn off the compressor power switch
to prevent the disarming of the thermal relay when power returns again.
- Before disconnecting the pressure hose from the compressor for any reason, first close
the air outlet register and release the residual pressure through the drainage register (12).
There is condensation from air humidity inside the tank that must be removed periodically,
we recommend the removal of this water accumulation to be carried out daily.
Precautions and warnings “during the use” of equipment
PRECAUTIONS, RESTRICTIONS AND WARNINGS
Precautions and warnings “after” the use of equipment
- Turn off the main switch of the chair when it is not in use for an extended period of time.
- Always maintain the equipment clean for the next operation.
- Do not modify any part of the equipment. Do not disconnect the cable or other
connections without need.
- Before cleaning the equipment, turn off the main switch.
- Avoid spilling water, even accidentally, or other liquids inside the equipment, which
could cause short circuits.
- Do not use microabrasive material or steel wool when cleaning, or employ organic
solvents or detergents which contain solvents such as ether, stain remover, gasoline etc.
Precautions and warnings during the “cleaning” of equipment
NOTE: We recommend reading this manual to the full understanding of it. Use it as a
resource of information.