4.1.1 - Front Panel
1. Power
Switch
2. Power
Indicator
3.
Output Current Display
4.
Output Voltage Display
5.
Manual Current Polarity Control
6.
Local Lockout Indicator
7.
Power Supply Enabled Indicator
8. Forward
Current
Indicator
9.
Reverse Current Indicator
10. Switch Over-Temperature Indicator
11. Magnet Over-Temperature Indicator
12. Magnet Water Flow Failure Indicator
4.1.2 - Rear Panel
1.
AC Mains Input (Auxiliary Power Supply) - 115 - 220VAC, 2A
2.
Fuse Holder / Voltage Selector
3.
USB Port - Type B USB connection for computer control
4.
Sensor Power - ± 12V power for Senis Magnetic Field Transducer
5.
Sensor Input - Senis analog Magnetic Field Transducer input
6.
Control Mode Switch - Selects either internal computer control or external analog
control input signal.
7.
Analog Input - When selected, the Power Supply Full Scale output is proportional to a
0 to 10 volt control signal applied to this terminal
8.
Magnet Interlock Connection
9.
Power Supply Interlock Connection
10. Ground – Power Supply and Electromagnet GROUND connection
11. Output Positive to Magnet
12. Power Supply Negative Input
13. Output Negative to Magnet
14. Power Supply Positive Input