GMR STENSBALLE Page 3 User Manual Download

Page: 3 / 34

GMR maskiner a/s

Page 3

STENSBALLE rotary mowers

Operating Instructions

Registration of Use

Stensballe manufactures quality machines for professional users.

The warranty period on our machines is 12 months from the purchase date, and covers any material or

manufacturing defects.

Any parts that have suffered damage as a result of material and production faults will be replaced by

GMR maskiner a/s at no extra charge.

Consequential damage and wearing parts will not be replaced.

A condition for the processing of claims is that this registration for use is submitted to GMR maskiner a/s

no later than 1 month after delivery to the user.

This can be done via our website www.gmr.dk or by completing and scanning/submitting the coupon

below to:

GMR maskiner a/s

Saturnvej 17

8700 Horsens, Denmark

[email protected]

Registration for use:

Machine number

Delivery date

Model

End user

Address

Dealer

Summary of Contents for STENSBALLE



































Search results

Summary of Contents for STENSBALLE

Reviews:

Related manuals for STENSBALLE

Brands by name

Popular brands

GMR STENSBALLE, User Manual

Search results

Summary of Contents for STENSBALLE

Reviews:

Related manuals for STENSBALLE

Brands by name

Popular brands