GMC YUKON 2018 Owner'S Manual Download

Page: 34 / 425

GMC Yukon/Yukon XL/Denali Owner Manual (GMNA-Localizing-U.S./

Canada/Mexico-11349262) - 2018 - crc - 6/20/17

Keys, Doors, and Windows

Battery Replacement

Replace the battery in the
transmitter soon if the REPLACE
BATTERY IN REMOTE KEY
displays in the DIC.

Caution

When replacing the battery, do
not touch any of the circuitry on
the transmitter. Static from your
body could damage the
transmitter.

To replace the battery:

1. Separate and remove the back

cover of the transmitter with a
flat, thin object, such as a coin.

2. Press and slide the battery

down toward the pocket of the
transmitter in the direction of
the key ring. Do not use a
metal object

3. Remove the battery.

4. Insert the new battery, positive

side facing up. Replace with a
CR2032 or equivalent battery.

5. Push together the transmitter

back cover top side first, and
then the bottom toward the
key ring.

Remote Keyless Entry
(RKE) System Operation
(Keyless Access)

The Keyless Access system allows
for vehicle entry when the
transmitter is within 1 m (3 ft). See

“

Keyless Access Operation

”

later in

this section.

The RKE transmitter functions may
work up to 60 m (197 ft) away from
the vehicle.

Other conditions can affect the
performance of the transmitter. See

Remote Keyless Entry (RKE)
System

Summary of Contents for YUKON 2018










































































































































































































































































































































































































































Search results

Summary of Contents for YUKON 2018

Reviews:

Related manuals for YUKON 2018

Brands by name

Popular brands

GMC YUKON 2018, Owner'S Manual

Search results

Summary of Contents for YUKON 2018

Reviews:

Related manuals for YUKON 2018

Brands by name

Popular brands