GMC Terrain/Terrain Denali Owner Manual (GMNA-Localizing-MidEast-
15231009) - 2022 - CRC - 5/25/21
106
Instruments and Controls
viscosity. On some models, the oil pump will
vary engine oil pressure according to engine
needs. Oil pressure may change quickly as
the engine speed or load varies. This is
normal. If the oil pressure warning light or
Driver Information Center (DIC) message
indicates oil pressure outside the normal
operating range, check the vehicle's oil as
soon as possible.
Driver Information Center (DIC)
(Uplevel and Denali)
The DIC displays are shown in the center of
the instrument cluster in the Info app. See
Instrument Cluster (Base and Uplevel)
or
Instrument Cluster (Denali Only)
. The
displays show the status of many vehicle
systems. The controls for the DIC are on the
right steering wheel control.
w
or
x
:
Press to move up or down in
a list.
o
or
p
:
Press to move between the
interactive display zones in the cluster.
V
:
Press to open a menu or select a menu
item. Press and hold to reset values on
certain screens.
Info Page Options
The info pages on the DIC can be turned on
or off through the Options menu.
1. Press
o
or
p
to scroll to the Options
application.
2. Press
w
or
x
to scroll to the Info Page
Options and press
V
.
3. Press
w
or
x
to move through the list
of possible information displays.
4. Press
V
while an item is highlighted to
select or deselect that item. When an
item is selected, a checkmark will appear
next to it.
Info Pages
The following is the list of all possible DIC
info page displays. Some may not be
available for your particular vehicle. Some
items may not be turned on by default but
can be turned on through the Options app.
See
“
Info Page Options
”
earlier in this
section.
Speed :
Shows the vehicle speed in either
kilometers per hour (km/h) or miles per
hour (mph). If equipped, press
V
to open
the menu and select to display speed limit
signs. The sign will show
“
− −
”
when there
is no detected speed limit or the system is
unavailable.
Speed Limit :
Shows sign information, which
comes from a roadway database in the
onboard navigation, if equipped. The sign
will show
“
− −
”
when there is no detected
speed limit or the system is unavailable.
