background image

13

The Drive Mode Control automatically 

adjusts various vehicle control systems 

based on driving preferences, weather and 

road conditions. The modes are displayed 

on the Driver Information Center.

  Rotate the Drive Mode Control knob on 

the left side of the instrument panel to 

select the desired mode: 

  Tour – Use for normal driving

  Sport – Use for enhanced respon-

siveness on paved roads

  Snow (2WD only) – Use for 

enhanced traction during slippery 

conditions

  Off-Road (4WD only) – Use for 

enhanced control on unpaved 

roads or trails at moderate speeds

  Terrain (4WD only) – Use for enhanced control in low-speed off-road conditions. 

This mode provides greater control by automatically braking the vehicle when 

traversing various terrain or obstacles. Only available with single-speed transfer 

cases when in

4

4

2

. Refer to Driver Mode Control in your Owner’s Manual. 

  Tow/Haul – Use to reduce shift cycling when towing or hauling heavy loads in 

stop and go traffic, rolling hills, or busy parking lots. 

See Driving and Operating in your Owner’s Manual.

Use the four-wheel drive buttons on the left side of the instrument panel to shift into 

and out of four-wheel drive. The Driver Information Center displays the current status of 

the transfer case.
AUTO Auto Four-Wheel Drive High – Use 

when traction conditions vary. Shift into this 

mode at any speed except when shifting  

from

4

4

2

.

4

4

2

 Two-Wheel Drive High – Use for most 

streets and highways. Shift into this mode at 

any speed except when shifting from

4

4

2

.

4

4

2

 Four-Wheel Drive High – Use when extra 

traction is needed or in most off-road driving. 

Shift into this mode at any speed up to 75 mph except when shifting from

4

4

2

.

4

4

2

 Four-Wheel Drive Low

F

 – Use when driving off-road in deep sand, mud or snow, or 

on steep hills. Shift into or out of this mode when the vehicle is stopped or moving less 

than 3 mph with the transmission in Neutral. Shift the transmission into gear when the 

indicator light stops flashing. 
N Neutral

F

 – Use when dolly or dinghy towing the vehicle behind an RV. Neutral is not 

available with the single speed transfer case. Refer to your Owner’s Manual for the shift 

procedure.

See Driving and Operating in your Owner’s Manual. 

F

 

Optional equipment    

DRIVE MODES

F

FOUR-WHEEL DRIVE

F

Summary of Contents for SIERRA 2019





















Reviews: