Home
/
GMC
/
Savana 2016
/
Owner'S Manual

GMC Savana 2016, Owner'S Manual, Page: 228 / 344

Share

Page: 228 / 344

GMC Savana 2016 Owner'S Manual Download Page 228

GMC Savana Owner Manual (GMNA-Localizing-U.S./Canada-9159232) -

2016 - crc - 6/17/15

Vehicle Care

227

If coolant is needed, add the proper
mixture directly to the radiator, but
be sure the cooling system is cool
before this is done.

1. Remove the radiator pressure

cap when the cooling system,
including the radiator pressure
cap and upper radiator hose, is
no longer hot. Turn the
pressure cap slowly
counterclockwise until it first
stops. Do not press down while
turning the pressure cap.

If a hiss is heard, wait for that
to stop. A hiss means there is
still some pressure left.

2. Keep turning the pressure cap,

but now push down as you turn
it. Remove the pressure cap.

3. Fill the radiator with the proper

DEX-COOL coolant mixture, up
to the base of the filler neck.
See

Recommended Fluids and

Lubricants

0

303

for more

information about the proper
coolant mixture.

4. Fill the coolant recovery tank to

the COLD FILL mark.

5. Reinstall the cap back on the

coolant recovery tank, but
leave the radiator pressure
cap off.

«
...
226
227
228
229
230
...
»

Summary of Contents for Savana 2016

























































































































































































































































































































































Reviews:

No comments