GMC Savana 2016 Owner'S Manual Download Page 133

Page: 133 / 344

GMC Savana Owner Manual (GMNA-Localizing-U.S./Canada-9159232) -

2016 - crc - 6/17/15

132

Infotainment System

4. Buttons 1 - 6

Saves and selects favorite
stations.

5. EQ (Equalizer)

Press to adjust the
equalizer.

(Tone/Tune)

Press to set the bass,
midrange, treble, fade, and
balance.

Turn to manually select
radio stations.

7. CAT (Category)

Press to display a list of XM
categories.

8. Auxiliary Input Jack (If

Equipped)

Use to connect external
audio devices.

9. SRCE

Press to scroll through
auxiliary devices, AM, FM,
or SiriusXM, if equipped.

10.

FWD (Forward)

Press and hold to fast
forward through a track.

11.

REV (Reverse)

Press and hold to go
backward fast through a
track.

12.

(Power/Volume)

Press to turn the
infotainment system on
or off.

Turn to adjust the volume.

13.

SEEK

Seeks the next station.

14.

SEEK

Seeks the previous station.

15.

(Clock)

Press to set the clock
and date.

Summary of Contents for Savana 2016

























































































































































































































































































































































Search results

Summary of Contents for Savana 2016

Reviews:

GMC Savana 2016, Owner'S Manual, Page: 133 / 344

Search results

Summary of Contents for Savana 2016

Reviews: