GMC Corvette 1984 Repair Manual Download Page 2

Page: 2 / 4

Fig. Fig. 2: Unplug the electrical connector from the ECT sensor

Remove the water pump and crankshaft balancer, as outlined in Engine & Engine Overhaul of this repair guide.

Fig. Fig. 3: The water pump must be removed for access to the distributor

1992 Chevrolet Corvette 5.7L SFI OHV 8cyl

2 of 4

8/11/2010 1:24 PM

Summary of Contents for Corvette 1984

Page 1: ...Temperature IAT electrical connector 3 Remove the air intake duct 4 Fig Fig 1 Unfasten the retainers then remove the air intake duct Remove the accessory drive belt as outlined in General Information...

Page 2: ...T sensor Remove the water pump and crankshaft balancer as outlined in Engine Engine Overhaul of this repair guide 9 Fig Fig 3 The water pump must be removed for access to the distributor 1992 Chevrole...

Page 3: ...p surface of the driveshaft for proper alignment during installation 16 To install Replace the O rings on the coupling shaft or ignition system performance may suffer Lubricate the O rings and the end...

Page 4: ...removal 21 Install the drive belt tensioner 22 Install the crankshaft balancer and water pump as outlined in Engine Engine Overhaul of this repair guide 23 Attach the ECT sensor connector 24 Refill th...