GMC Acadia Denali 2012 Owner'S Manual Download Page 58

Page: 58 / 456

Black plate (4,1)

GMC Acadia/Acadia Denali Owner Manual - 2012

3-4

Seats and Restraints

Move the lever (B) up or down to
raise or lower the seat.

Use the lever (C) to adjust the
seatback. See

Reclining Seatbacks

on page 3

‑

Power Seat Adjustment

A. Seat Adjustment Control

B. Seatback Control

C. Lumbar Control

To adjust a power seat, if equipped:

Move the seat forward or
rearward by sliding the
control (A) forward or rearward.

Raise or lower the entire seat by
moving the control (A) up
or down.

Adjust the seatback by tilting the
top of the control (B) forward or
rearward.

See

Reclining Seatbacks on

page 3

‑

Increase or decrease lumbar
support by pressing the front or
rear of the control (C).

See

Lumbar Adjustment on

page 3

‑

Lumbar Adjustment

Manual Lumbar

If available, move the handle
forward or rearward to increase or
decrease lumbar support.

Summary of Contents for Acadia Denali 2012









































































































































































































































































































































































































































































Search results

Summary of Contents for Acadia Denali 2012

Reviews:

GMC Acadia Denali 2012, Owner'S Manual, Page: 58 / 456

Search results

Summary of Contents for Acadia Denali 2012

Reviews: