GMC Acadia Denali 2012 Owner'S Manual Download Page 377

Page: 377 / 456

Black plate (71,1)

GMC Acadia/Acadia Denali Owner Manual - 2012

Vehicle Care

10-71

3. Put the flat tire in the rear

storage area with the valve stem
pointing toward the rear of the
vehicle.

A. Cable

B. Liftgate Hinges

C. Spare Tire Heat Shield

D. Center of the Wheel

E. Door Striker

4. Pull the cable (A) through the

door striker (E), the center of the
wheel (D), and the plastic spare
tire heat shield (C), as shown.

5. Hook the cable onto the outside

portion of the liftgate hinges (B).

6. Hook the other end of the cable

onto the outside portion of the
liftgate hinge on the other side of
the vehicle.

7. Pull on the cable to make sure it

is secure.

8. Make sure the metal tube is

centered at the striker. Push the
tube toward the front of the
vehicle.

9. Close the liftgate and make sure

it is latched properly.

Summary of Contents for Acadia Denali 2012









































































































































































































































































































































































































































































Search results

Summary of Contents for Acadia Denali 2012

Reviews:

GMC Acadia Denali 2012, Owner'S Manual, Page: 377 / 456

Search results

Summary of Contents for Acadia Denali 2012

Reviews: