GMC Acadia Denali 2012 Owner'S Manual Download Page 371

Page: 371 / 456

Black plate (65,1)

GMC Acadia/Acadia Denali Owner Manual - 2012

Vehicle Care

10-65

A. Tool Bag

B. Wing Bolt

C. Jack

2. Remove the wing bolt (B) by

turning it counterclockwise.

3. Push the jack (C) up out of the

holding bracket and remove the
tool bag (A).

4. Turn the jack on its side, with the

bottom facing toward you.

5. Pull the jack straight out, bottom

first.

A. Jack

B. Wrench (Three-Piece Shown,

One-Piece Similar)

The tools you will be using include
the jack (A) and wrench (B).

Removing the Spare Tire

The compact spare tire is located
under the vehicle, in front of the rear
bumper. See

Compact Spare Tire

on page 10

‑

for more information.

A. Rear Convenience Center

B. Wrench (Three-Piece Shown,

One-Piece Similar)

C. Carpet Cutout

D. Hoist Shaft

E. Compact Spare Tire

Retainer

1. Open the storage compartment

door of the convenience
center (A) that is nearest the
liftgate.

Summary of Contents for Acadia Denali 2012









































































































































































































































































































































































































































































Search results

Summary of Contents for Acadia Denali 2012

Reviews:

GMC Acadia Denali 2012, Owner'S Manual, Page: 371 / 456

Search results

Summary of Contents for Acadia Denali 2012

Reviews: