GMC Acadia Denali 2012 Owner'S Manual Download Page 323

Page: 323 / 456

Black plate (17,1)

GMC Acadia/Acadia Denali Owner Manual - 2012

Vehicle Care

10-17

If coolant is needed, add the proper
mixture directly to the radiator, but
be sure the cooling system is cool
before this is done.

1. Detach the fasteners and lift off

the panel that covers the
radiator cap.

2. Remove the radiator pressure

cap when the cooling system,
including the upper radiator
hose, is no longer hot. Turn
the pressure cap slowly
counterclockwise about one
full turn.

If a hiss is heard, wait for that to
stop. A hiss means there is still
some pressure left in the
system.

3. Keep turning the pressure cap

slowly and remove it.

4. Fill the radiator to the base of

the filler neck with the proper
DEX-COOL coolant mixture.

5. Fill the coolant recovery tank to

the FULL COLD mark.

6. Reinstall the cap on the coolant

recovery tank but leave the
radiator pressure cap off.

7. Start the engine and let it run

until the upper radiator hose
feels warm. Any time during this
procedure, watch out for the
engine cooling fans.

Summary of Contents for Acadia Denali 2012









































































































































































































































































































































































































































































Search results

Summary of Contents for Acadia Denali 2012

Reviews:

GMC Acadia Denali 2012, Owner'S Manual, Page: 323 / 456

Search results

Summary of Contents for Acadia Denali 2012

Reviews: