GMC Acadia Denali 2012 Owner'S Manual Download Page 25 | Manualshive

Page: 25 / 456

GMC Acadia Denali 2012 Owner'S Manual Download Page 25

Black plate (19,1)

GMC Acadia/Acadia Denali Owner Manual - 2012

In Brief

1-19

[

:

Press to disengage cruise

control without erasing the set
speed from memory.

See

Cruise Control on page 9

‑

30

.

Navigation System

If the vehicle has a navigation
system, there is a separate
navigation system manual that
includes information on the radio,
audio players, and navigation
system.

The navigation system provides
detailed maps of most major
freeways and roads. After a
destination has been set, the
system provides turn-by-turn
instructions for reaching the
destination. In addition, the system
can help locate a variety of points of
interest (POIs), such as banks,
airports, restaurants, and more.

See the navigation system manual
for more information.

Ultrasonic Parking Assist

If available, Ultrasonic Rear Parking
Assist (URPA) uses sensors on the
rear bumper to detect objects while
parking the vehicle. It operates at
speeds less than 8 km/h (5 mph).
URPA uses audible beeps to
provide distance and system
information.

Keep the sensors on the vehicle's
rear bumper clean to ensure proper
operation.

See

Ultrasonic Parking Assist on

page 9

‑

32

for more information.

Storage Compartments

For vehicles with a second row
center console, press the
buttons (B) or (C) to access storage
areas.

Lift up on (A) for additional
storage area.

See

Floor Console Storage on

page 4

‑

3

.

«
...
23
24
25
26
27
...
»

Summary of Contents for Acadia Denali 2012









































































































































































































































































































































































































































































Reviews:

No comments